POWERMASTER “Push Type” Internal Tube Cutters quickly cuts through the walls of ferrous tubes in Condensers and Heat Exchangers as a step in their removal from the tube sheet.

POWERMASTER“推式”內部切管器快速切割冷凝器和熱交換器中的鐵管壁，作為從管板上拆除鐵管的一個步驟。

This sturdy “Push Type” Internal Tube Cutters can be used with a portable Electric or Air Drill Motor.

這種堅固的“推式”內管切割機可與便攜式電動或氣鉆電機配合使用。

“Push Type” Cutters are simple to operate. Merely insert it into the tube, apply power, press inward and the tube can be cut in a few seconds. Releasing of inward pressure automatically retracts the Cutter Bit. These Tube Cutters are equipped with an adjustable collar suitable for reaching into tubes at various depths.

“推式”刀具操作簡單。只需將其插入管中，通電，向內按壓，幾秒鐘內即可切斷管。釋放向內壓力會自動收回刀頭。這些切管機配備了一個可調節(jié)的套環(huán)，適合在不同深度下進入管道。

The replaceable cutting bit can be interchanged in a few seconds. Standard adjustable reach is 4”(101.6mm) and they are available in optional increments of 2”(50.8mm). “A” reach = 6”(152.4mm). “B” reach = 8”(203.2mm). “C” reach = 10”(254.0mm) etc.

可更換的切削鉆頭可以在幾秒鐘內互換。標準可調范圍為4英寸（101.6毫米），可選增量為2英寸（50.8毫米）?！癆”范圍=6“（152.4mm）?！癇”范圍=8“（203.2mm）。“C”范圍=10“（254.0mm）等。

All Tube Cutters come with a complete set of pilots covering the entire range of tube thickness for a particular tube O.D. (ATP-625 tube cutters come with a built in pilot suitable for one tube ID only.)

所有切管機均配有一套完整的導向器，覆蓋特定管外徑的整個管厚度范圍。（ATP-625切管機配有一個內置導向器，僅適用于一個管ID。）

All Tube Cutters are available for MM tube sizes also. Please enquire.

所有管子切割機也可用于毫米管尺寸。請查詢。

• 關鍵詞: 切管機，換熱管切管器，內徑切管器